Ghost Patrol 5.0 Connector For GEN 1-5 (EXCEPT 42 AND 43)

GHOST PATROL 5.0 lb. was named in honor of the Georgia State Patrol. This great agency was the first major law enforcement agency to adopt a Ghost product. I came up with this design while I was attending a Glock Advanced Law Enforcement Armorers School at Glock's US factory. We had to repair Glock's that were in various stages of disrepair and/or non-operability. One Glock in particular that I was tasked to repair would not fire. I did all the trouble shooting techniques but I could not determine why the pistol still failed to fire. The instructor came and asked what the problem was? I described the problem he smiled and stated that the problem was a "connector trigger friction failure" that can happen on all Glock's. The solution was to change the connector, trigger & lubricate the contact points. Upon experimentation I discovered that this problem could be solved by the addition of at least one hole where the "connector trigger friction" was at its greatest. These holes make your Glock more reliable and because the holes are center line in the body of the connector the connector is not subject to torsioning or bending.

This is why the PATROL is the only trigger connector designed specifically for the extremes and rigors of Law Enforcement Patrol-it will make your Glock more reliable! The holes remove debris that would normally choke your Glock and increase the problem of "connector trigger friction failure". This trigger connector was designed to keep your Glock firing under the most adverse conditions. The "HOLES" remove debris from the trigger mechanism and reduces the friction inherent with the Glock trigger mechanism. These unique features are critical for hardcore reliable trigger functioning and are only available with the patent pending GHOST PATROL. This is a no "holes" barred-down and dirty-hardcore trigger connector. When your life is on the line there is nothing better than a GHOST PATROL in your Glock.