|
|
|
|
DPM Systems
|
|
|
|
DPM Systems Advanced Magnetic Recoil System 17
|
| DPM Sysetms Advanced Magnetic Recoil System for the Glock G-17, 22, 31, & 37 Pistol Models. |
|
|
|
|
|
|
|
|
Mechanical and Magnetomechanical systems
of multiple springs for recoil's reduction in guns.
These systems based on patents which were designed and constructed or the improvement of light weaponry regarding recoil, firing speed, jams, protection of the frame so that no modifications are required for their placement.
We created the Mechanical and Magnetomechanical systems of multiple springs to address the above concerns. These products have been tested rigorously which has confirmed their reliability, form, fit, and function. The Patents, for these products have been registered in Greece and with PCT in W.I.P.O. (World International Patent Office). These Patents attest the fact that the Mechanical and the Magnetomechanical systems for recoil's reduction are World Innovations that exceed in technological background inclusive of all the existing technologies for the reduction of recoil of guns. These world renowned products can be installed without any modification to your gun and you gain:
Significant recoil reduction
Better control and greater accuracy
Slide Protection
Elimination of jams
Better double-tap concentration
Improved Firing Speed
Faster follow up shots
Frame protection
No modification is required
The new innovative DPM Mechanical Recoil System utilizes a three spring approach which is unsurpassed in its mating of components with form, fit, and function. This model is specifically made for pistols without an accessory rail. It takes seconds to install our unit, no special tools needed, and our system replaces the stock recoil rod and spring. This particular unit does not change the envelope size of the weapon.
The new innovative DPM MagnetoMechanical Recoil System uses an innovative combination of springs and magnets to gives unequaled and exceptional performance in recoil reduction. This model is specifically made for pistols with an accessory rail. Installation is user friendly and takes seconds to install without any tools. This particular unit does change the envelope size of the weapon whereby you will need a holster that is made for a Tac-Light or a laser.
SYSTEM'S FUNCTION
PATENT - PCT / GR 2004/000008
WO 2004/073306
This system entails the use of a magnet with and an integral base which in cooperation with the mechanic system of multiple springs, control the acceleration and the deceleration of the slide at the duration of the regression that is caused from the gun's bullet firing.
The slide 's momentary delay from the presence of the magnet achieves the maximization of escape of gases from the barrel's muzzle. Consequently the slide is moving back more gently, transmitting less kinetic energy in the frame
The mechanic system of multiple springs functions as stop gap so as to it absorbs the remaining kinetic energy in the slide. The results are: reduced recoil, protection of the slide and frame, and enhanced control and shot placement.
" In the beginning we were very skeptical.
Now each member of the team holds one
of these systems and I am convinced that
soon you are going to hold one too
It's simply matter of time."
John M.
Antiterrorist Team
The DPM Systems Technologies are pleased to inform you that the Magnetomechanical system for Glock 17-22 was toughly tested for several months by the members of NTOA (NATIONAL TACTICAL OFFICERS ASSOCIATION) and passing successfully all tests it is henceforth a product Tested and Recommended for tactical use.
Mechanical and Magnetomechanical systems
of multiple springs for recoil's reduction in guns.
These systems based on patents which were designed and constructed or the improvement of light weaponry regarding recoil, firing speed, jams, protection of the frame so that no modifications are required for their placement.
We created the Mechanical and Magnetomechanical systems of multiple springs to address the above concerns. These products have been tested rigorously which has confirmed their reliability, form, fit, and function. The Patents, for these products have been registered in Greece and with PCT in W.I.P.O. (World International Patent Office). These Patents attest the fact that the Mechanical and the Magnetomechanical systems for recoil's reduction are World Innovations that exceed in technological background inclusive of all the existing technologies for the reduction of recoil of guns. These world renowned products can be installed without any modification to your gun and you gain:
Significant recoil reduction
Better control and greater accuracy
Slide Protection
Elimination of jams
Better double-tap concentration
Improved Firing Speed
Faster follow up shots
Frame protection
No modification is required
The new innovative DPM Mechanical Recoil System utilizes a three spring approach which is unsurpassed in its mating of components with form, fit, and function. This model is specifically made for pistols without an accessory rail. It takes seconds to install our unit, no special tools needed, and our system replaces the stock recoil rod and spring. This particular unit does not change the envelope size of the weapon.
The new innovative DPM MagnetoMechanical Recoil System uses an innovative combination of springs and magnets to gives unequaled and exceptional performance in recoil reduction. This model is specifically made for pistols with an accessory rail. Installation is user friendly and takes seconds to install without any tools. This particular unit does change the envelope size of the weapon whereby you will need a holster that is made for a Tac-Light or a laser.
SYSTEM'S FUNCTION
PATENT - PCT / GR 2004/000008
WO 2004/073306
This system entails the use of a magnet with and an integral base which in cooperation with the mechanic system of multiple springs, control the acceleration and the deceleration of the slide at the duration of the regression that is caused from the gun's bullet firing.
The slide 's momentary delay from the presence of the magnet achieves the maximization of escape of gases from the barrel's muzzle. Consequently the slide is moving back more gently, transmitting less kinetic energy in the frame
The mechanic system of multiple springs functions as stop gap so as to it absorbs the remaining kinetic energy in the slide. The results are: reduced recoil, protection of the slide and frame, and enhanced control and shot placement.
" In the beginning we were very skeptical.
Now each member of the team holds one
of these systems and I am convinced that
soon you are going to hold one too
It's simply matter of time."
John M.
Antiterrorist Team
The DPM Systems Technologies are pleased to inform you that the Magnetomechanical system for Glock 17-22 was toughly tested for several months by the members of NTOA (NATIONAL TACTICAL OFFICERS ASSOCIATION) and passing successfully all tests it is henceforth a product Tested and Recommended for tactical use.
Mechanical and Magnetomechanical systems
of multiple springs for recoil's reduction in guns.
These systems based on patents which were designed and constructed or the improvement of light weaponry regarding recoil, firing speed, jams, protection of the frame so that no modifications are required for their placement.
We created the Mechanical and Magnetomechanical systems of multiple springs to address the above concerns. These products have been tested rigorously which has confirmed their reliability, form, fit, and function. The Patents, for these products have been registered in Greece and with PCT in W.I.P.O. (World International Patent Office). These Patents attest the fact that the Mechanical and the Magnetomechanical systems for recoil's reduction are World Innovations that exceed in technological background inclusive of all the existing technologies for the reduction of recoil of guns. These world renowned products can be installed without any modification to your gun and you gain:
Significant recoil reduction
Better control and greater accuracy
Slide Protection
Elimination of jams
Better double-tap concentration
Improved Firing Speed
Faster follow up shots
Frame protection
No modification is required
The new innovative DPM Mechanical Recoil System utilizes a three spring approach which is unsurpassed in its mating of components with form, fit, and function. This model is specifically made for pistols without an accessory rail. It takes seconds to install our unit, no special tools needed, and our system replaces the stock recoil rod and spring. This particular unit does not change the envelope size of the weapon.
The new innovative DPM MagnetoMechanical Recoil System uses an innovative combination of springs and magnets to gives unequaled and exceptional performance in recoil reduction. This model is specifically made for pistols with an accessory rail. Installation is user friendly and takes seconds to install without any tools. This particular unit does change the envelope size of the weapon whereby you will need a holster that is made for a Tac-Light or a laser.
SYSTEM'S FUNCTION
PATENT - PCT / GR 2004/000008
WO 2004/073306
This system entails the use of a magnet with and an integral base which in cooperation with the mechanic system of multiple springs, control the acceleration and the deceleration of the slide at the duration of the regression that is caused from the gun's bullet firing.
The slide 's momentary delay from the presence of the magnet achieves the maximization of escape of gases from the barrel's muzzle. Consequently the slide is moving back more gently, transmitting less kinetic energy in the frame
The mechanic system of multiple springs functions as stop gap so as to it absorbs the remaining kinetic energy in the slide. The results are: reduced recoil, protection of the slide and frame, and enhanced control and shot placement.
" In the beginning we were very skeptical.
Now each member of the team holds one
of these systems and I am convinced that
soon you are going to hold one too
It's simply matter of time."
John M.
Antiterrorist Team
The DPM Systems Technologies are pleased to inform you that the Magnetomechanical system for Glock 17-22 was toughly tested for several months by the members of NTOA (NATIONAL TACTICAL OFFICERS ASSOCIATION) and passing successfully all tests it is henceforth a product Tested and Recommended for tactical use.
|
|
Be the first person to review this product
|
|
You must be logged in to write a review
|
|
|
|
|
|
|
|
|
|
©Copyright
2013
Glockparts.com LLC, All Rights Reserved. Site fueled by
Hydra Back Office
|
|